The Compact RO unit includes:
1 x Sediment Pre-filter
1 x Carbon Pre-filter GAC Filter
1 x 50 US gallon per day membrane
1 x Fitting Kit
Sufficient Tubing for standard installation
Please click here for Refillable In-Line Deionisation Filter Cartridge
(2 x 2.5inch clips also required)
This Compact Reverse Osmosis Unit is a 3 stage water filter producing 50 Gallons of water per day which can provide water for Aquariums, Propagation of Plants and use in Pharmaceuticals it removes up to 99% of water contanimants. This system can also have a post inline DI filter added (post inline di filter and 2.5" clips required.)Replacement filter links:Replacement Carbon Filter 2"Replacement 5 micron Sediment Filter 2"
This Compact Unit relies on specific water input needs to function as a proper reverse osmosis system, so please ensure to check the technical details and criteria information below before you purchase.
The effectiveness and productivity of RO systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your home water pressure and temperature.
Manufacturers recommend 60 psi is required at the membrane for full production, not everyone's cold water is at 60 psi and 77 degrees F; therefore, you might get less than 36 GPD, perhaps 50% or even less if your pressure and temperature are very low! Please consider these factors before you finally decide on which system is best for youTechnical Information
Operating Temperature 5C-45C
Operating pressure 15-125psi
50 Gallons per day RO Membrane
Virtually removes everything to provide pure water
Replacement filters readily available.
(stage 1) Pre Sediment Filter designed to remove particles, impurities from water
(stage 2) GAC made from granular carbon media designed to remove Chlorine & odour from water
(stage 3) RO Membrane Filter designed to remove, Heavy Metals, Pesticides, Hormones and Bacteria.
(stage 4) DI Filter Stage- Inline DI filter Pod readily available will require 2.5" housing to housing clips (DI Resin also available to buy online).
Dependent upon use of the unit, the 1-2 cartridge filters will need changing every 4-6 months, the membrane filter requires changing at approximately 18 months.All filters are in stock and can be purchased at any time. The need to change filters is dependent upon actual use and the quality of your water.Input water must meet the following criteria for proper Reverse Osmosis function:
Temperature must be less than 45 degrees Celsius
Iron content no more than 0.1 ppm
Water pressure must be a minimum of 1 Bar PH not less than 3 and not more than 11
TDS under 1000 ppm recommended.
All RO-World Reverse Osmosis Systems are shipped fully assembled and we provide email support. People who bought this item also bought:
In-Line Dual TDS Meter: HM Digital DM-1